Top 10 Lamp Holder Fittings UK – DIY & Tools

As an Amazon Associate I earn from qualifying purchases.

1. ElekTek

#ad

ElekTek Lamp Holder Un-Switched Bayonet Cap B22 Half Inch Entry with Shade Ring Brass

#ad
ElekTek #ad - Standard unswitched b22 22mm bayonet cap lamp holder with shade ring - suitable for bulbs up to 200W for SWITCHED B22 version, ElekTek Safety Switch available in separate listing which cuts power to the plunger contacts when a bulb in not in place.

When re-assembling ensure ceramic insert is aligned correctly in base & body alignment slots are aligned with ceramic insert. Warning: all metal light fittings must be earthed. Made in the UK. Internal locking screw mounted in a separate riveted & threaded base ensuring your lighting does not come apart with use beware of cheaper, pressed type bases that cannot carry a locking screw - loosen screw, thread onto existing threaded fitting and tighten locking screw before wiring.

Hand assembled - easy to separate for fitting: simply remove the thin upper shade ring by unscrewing anti-clocwise; hold base with the Earth terminal pinched between thumb and index finger and unscrew thicker lower ring by unscrewing anti-clockwise. Maximum assembled height: 48mm.
BrandElekTek #ad
ManufacturerElekTek #ad
Height4.8 cm (1.89 Inches)
Length2.2 cm (0.87 Inches)
Width0.03 cm (0.01 Inches)
Part NumberL066
ModelL066

2. ElekTek

#ad

Brass, ElekTek Safety Switch Lamp Holder Half Inch with Back Plate Cover and Screws

#ad
ElekTek #ad - Always remember: metal fittings must be earthed - when re-assembling after wiring, please ensure Earth Strap on the switch insert sits outside of the lamp holder body as originally supplied - do not squeeze inside the lamp holder body.

B22 22mm bayonet cap with internal earth and locking screw in base. Made in uk: solid brass construction with solid brass shade ring. This solid brass b22 bayonet cap lamp holder is intended primarily for attachment to any solid, flat surface that can be drilled. 25mm diameter back plate nipple base plate with 27mm diameter cover and 3 screws. Mounted height 68mm. Maximum lamp holder diameter 32mm.
BrandElekTek #ad
ManufacturerElekTek #ad
Part Numberunknown

3. ElekTek

#ad

Back Plate Nipple Fitting 10mm Threaded Brass Boss 25mm Diameter with Screws For Lamp Bulb Holders

#ad
ElekTek #ad - 3 matching screws supplied. Precision made; round, smooth and burr-free. 25mm diameter back Plate with 3 countersunk screw holes. M10 10mm threaded Mounting Boss. Solid brass base - UK MADE.
BrandElekTek #ad
ManufacturerBuy It Better #ad
Weight0.01 kg (0.01 Pounds)
Part NumberL064

4. ElekTek

#ad

ElekTek Lamp Holder Unswitched Bayonet Cap B22 with Back Plate Cover and Screws Antique Brass

#ad
ElekTek #ad - All metal light fittings must be earthed. Internal locking screw mounted in a separate riveted & threaded base ensuring your lighting does not come apart with use beware of cheaper, pressed type bases that cannot carry a locking screw. Back-plate diameter 25mm, cover diameter 27mm. Standard b22 22mm bayonet cap fitting, unswitched, with shade ring - suitable for bulbs up to 200W. Cover is secured when you screw down the lamp holder base. Maximum assembled, fitted height 53mm.
BrandElekTek #ad
ManufacturerElekTek #ad
Part Numberunknown

5. LiangDian

#ad

6Pcs Wire Rope Lamp Holder 1.5mm*1m Lighting Suspension Kit Heavy Duty Ceiling Light Hanging Wire Stainless Steel Adjustable Wire Rope Kit Fitting Hanging Chains for Lamp Picture

#ad
LiangDian #ad - The high-quality materials can hang it use for a long time, screws and expansion screws. Your only need to install it on your lamp holder and connect the bulb base, you can use our lighting suspension chains kit for a long time with confidence. Its also suitable many occasions like homes, curtains, workplaces or any occasion where you need to hang the lamp or arts picture.

Adjustable wire: the length of the adjustable length wire rope can be adjusted manually, and you can adjust the length of the fitting hanging chains according to the height of the chandelier you want, and the adjusted picture hanging wire can still hold the chandelier firmly. It can bear a weight of 30g. Excellent material: the adjustable picture hanging wire is made of high-quality stainless steel material, has a high tensile strength, without sharp edges, which has excellent rust resistance and durability, is strong and durable, can withstand high weight items, is not easy to wear, and is safe and reliable so you can use it safety.

The length of the wire cable rope for lamp holder can be adjusted without the help of any tools. We are equipped with 6 wire kit for ceiling LED, square nuts, then you can to use it. Practical wire rope for lamp holder: this stainless steel lamp wire rope is used to install the chandelier in your living room or bedroom. Easy to install: the wire rope for ceiling light is easy to install. Wide application: the heavy duty stainless steel hanging wire kit suitable for hanging photo frames, signs, chandeliers, offices, card walls, various DIY lights.
BrandLiangDian #ad
ManufacturerLiangDian #ad
Weight30 kg (66.14 Pounds)
Part NumberLD-LampCable-041
ModelLD-LampCable-041

6. Merriway

#ad

Merriway BH02820 Switched Cord Grip Lamp Holder, White, 13 mm

#ad
Merriway #ad - Ceiling rose lamp holder. Light pendant kit. Electrical fittings and accessories. The size of the lamp holder is 13 mm.
BrandMerriway #ad
ManufacturerMerriway #ad
Height15 cm (5.91 Inches)
Length10 cm (3.94 Inches)
Width5 cm (1.97 Inches)
Part NumberBH02820
ModelBH02820

7. Merriway

#ad

Merriway BH02629 2 Pcs Replacement Short Lamp Holder Skirt, White 28mm 1.1/8 inch, Pack of 2 Pieces

#ad
Merriway #ad - Electrical fittings and accessories. Short spare skirt for lamp holder. The diameter of the spare skirt is 28 mm. Package dimensions: 100 l x 3. 0 h x 6. 0 w centimetres.
BrandMerriway #ad
ManufacturerMerriway #ad
Height12.5 cm (4.92 Inches)
Length10 cm (3.94 Inches)
Width2.5 cm (0.98 Inches)
Part NumberBH02629
ModelBH02629

8. FIRMERST

#ad

FIRMERST Outdoor E27 Lamp Holder 5m Rubber Cable UK Plug IP44 CE VDE Certification

#ad
FIRMERST #ad - Wide use: easy to fit a lampshade shade not included, ideal for shed, backyard, garden, patio. Ip44 waterproof cord: encasing H07RN-F rubber, weatherproof, designed for outdoor and indoor use. Certificate & guarantee: uk plug bs approved, CE VDE certification, IP44, sturdy, 2-year warranty. Plug in pendant light: 1 piece of E27 Max 15 watts, screw in light bulb bulb not included. Lamp holder cord: 5 meters of 2 core rubber cable, H07RN-F 2*1. 0mm, standard UK BS plug socket.
BrandFIRMERST #ad
ManufacturerFIRMERST #ad
Height6 cm (2.36 Inches)
Length8 cm (3.15 Inches)
Width8 cm (3.15 Inches)
Part NumberPN-LCF15FTSHBLK-UK

9. ElekTek

#ad

Elektek Back Plate Nipple Fitting 1/2-Inch Threaded Brass Boss 25mm Dia. With Screws for Lamp Bulb Holders

#ad
ElekTek #ad - 3 matching screws supplied. Solid brass - UK MADE. Precision made; round, smooth and burr-free. 1/2" threaded Mounting Boss. 25mm diameter back Plate with 3 countersunk screw holes.
BrandElekTek #ad
ManufacturerBuy It Better #ad
Weight0.01 kg (0.01 Pounds)
Part NumberL002

10. DiCUNO

#ad

Ceramic Socket with 150MM Lead,6-Pack, Bi-Pin Base for 12V Halogen/LED Birne, DiCUNO MR16 GU5.3 /G4 Lamp Holder

#ad
DiCUNO #ad - Mini spring mechanisms hold bulbs very tightly. Weight: 9g 032 oz. Wattage: 0-100W. Current: 0 - 2a. Ceramic lamp sockets, gu5. 3, gy6. 35, gz4, g4, mr11, gx5.3, holder common to: miniature Bi-Pin Base, G6. 35, mr16 lamp female Base Socket. Leads length: 15cm 6 inch. Leads diameter: 075mm. Voltage:12 - 250v. Ceramic base, mounting holes, thick silicone cooper wires.
BrandDiCUNO #ad
ManufacturerDiCUNO #ad
Height1.4 cm (0.55 Inches)
Length9.8 cm (3.86 Inches)
Weight0.05 kg (0.11 Pounds)
Width8.4 cm (3.31 Inches)
Part NumberDICUBA-G4